About Us

Konica Minolta Sensing Americas News< Back to News


Subpixel Metrology of microLED and AR/VR Display Applications

An ultra-high resolution version of the LumiTop, known as a spectrally enhanced imaging colorimeter with unprecedented accuracy for high speed 2D measurements, will be presented by Instrument Systems at the Display Week I-Zone 2019.

May 2019 – Konica Minolta Sensing Americas, Inc. and Instrument Systems GmbH will focus the spotlight at Display Week Exhibition in San Jose, CA from May 14 – 16 on applications representing the major trend in the display industry: more pixels. LEDs are a strong candidate for the realization of very high display resolutions with pixel sizes as small as 10 µm and equally small pixel pitches. A higher resolution means that imaging light measurement devices must advance accordingly. Within its LumiTop series, Instrument Systems developed an ultra-high-resolution camera with an extraordinary technical design and outstanding measuring portfolio for unprecedented accuracy and high speed 2D measurements. In the Innovation-Zone of the Display Week Exhibition the light measuring device will be presented in an application for display testing in production lines where tact times are extremely short. At booth #1528 the LumiTop is showcased with a head-mounted display to be measured as innovative AR/VR display application. Additionally, high-end measurement systems for quality control, automotive applications, and production testing will be presented by our light measurement experts.

The ultra-high resolution LumiTop model merges a 150-megapixel camera with the high-end spectroradiometer CAS-140D. Using the extremely accurate spectral information of the CAS-140D measurements as live reference guarantees spectroradiometric test accuracy across the whole image of the camera. The resolution of 150 megapixels thereby allows (sub-)pixel level analysis of complete displays in one single shot. This measurement device is thus perfect for very fast and accurate quality control and pixel calibration of OLEDs or LED displays in production lines. Many different test applications can be organized in a single test station, as, e.g., the evaluation of display uniformity, pixel defects, white balance, color gamut, contrast ratio or the measurement of intensity modulations. Notably,
the LumiTop can be equipped with a fast photometer for flicker or luminance modulation measurements.

For mixed reality technologies (AR/VR) the LumiTop is the perfect system in R&D labs. These innovative display applications require more, i.e. smaller pixels with higher fill factors. Luminance and color variations between pixels and subpixels are likely and strongly influence the visual quality of displays. Augmented reality glasses or virtual reality head-mounted displays are close-fitting to the observer’s eye. Thus, screen-door effects and pixel non-uniformities are easily visible and disturbing to the consumer. To
meet this high standard Instrument Systems GmbH developed the LumiTop series. An integrated pixel shift mechanism suppresses de-mosaicing artifacts by true full color measurements and even provides increased resolution of 600 megapixels. The product is integrated in Instrument Systems’ comprehensive new software “LumiSuite”, which comes with a user-friendly GUI for laboratory applications and a powerful software development kit allowing an easy implementation into any production line. Konica Minolta Sensing will be displaying its CA-410 Display Color Analyzer with its Type C probe with it’s ability to conform to the new color-matching functions for CIE 170-2:2015. Users can more accurately measure and adjust the chromaticity and white blance of dsplays that have a wide color gamut. Used for high-speed measurement on precise luminance, chromaticity and flicker of HDR displays including curved OLED screens.

Among these highlights more advanced lighting technology will be demonstrated at several photometric and spectroradiometric measuring stations at Display Week booth #1528:

High-power LED and LED Testing

Instrument Systems will show a complete light measurement setup with the high-end array spectroradiometer CAS-140D and the positioning station DTS-140. As the entire spectrum is captured simultaneously, very short measuring times can be achieved in the order of milliseconds with highest measurement accuracy. This makes the solution ideal for the characterization of low-lumen or LEDs. Typical application areas are display production and automotive interior lighting.

VCSEL Testing

The design of the recently launched spectroradiometer CAS 120B-HR of Instrument Systems is geared to the measurement of narrow-band emission sources e.g., laser diodes (also VCSEL). An exceptionally high spectral resolution of up to 0.12 nm full width at half maximum and particularly short integration times as low as 4 ms enable fast tests in the lab and production. Time-resolved measurements of laser diodes with a pulsed operating mode in the nanosecond range are also possible in an expanded setup with a
photodiode. Demo measurements and evaluations are presented at the booth.

Goniometric Display Measurement

Using the established DMS 803 display measurement system, Instrument Systems experts will be giving live demonstrations of the diverse possibilities of viewing angle dependent display analysis: motorized positioning unit, temperature chamber of -40 to +105°C, measurement of the spectral reflection value under direct/diffuse hemisphere lighting, determination of the contrast of OLED and LCD displays with different types of ambient light, etc. The latest features allow a qualification of curved displays.

We invite you to discuss your special measurement tasks with our experts at our booth and also to listen to Instrument Systems and Konica Minolta Sensing Americas’ expert lectures:

“Display Metrology: Basics, Framework, and Applications”

Monday, May 13 / Session 06 / 10:20 – 11:50 AM / Room LL21ABC

Speaker: Michael Becker, Instrument Systems GmbH Munich Germany

“Evaluating VR/AR and Curved OLED Screens using New Progressive Technological Instruments”

Tuesday, May 14 / Session F2.2 / 2:15PM / Executive Ballroom

Speaker: Jay Catral and Randy Klimek, Konica Minolta Sensing Americas, Ramsey, NJ

“Flicker from Electronic Displays: Reconsidering the Confusion”

Thursday, May 16 / Session 50.1 / 09:00 – 10:20 AM / Room LL20A

Speaker: Michael Becker, Instrument Systems GmbH Munich Germany

Co-Chair: Jürgen Neumeier, Instrument Systems GmbH, Munich, Germany

“OLED vs. LC Displays – The Race toward Rec. 2020 and HDRI”

Friday, May 17 / Session 83.1 / 10:40 – 11:00 AM / Room LL20A

Speaker: Michael Becker, Instrument Systems GmbH Munich Germany

Further information can be found on the following websites:
Konica Minolta Sensing’ website: https://sensing.konicaminolta.us/us/applications/instrument-systems/
Instrument Sytems website: http://www.instrumentsystems.com/

 

Figure: Zoomed-in measurements of an OLED display measured with the prototype of LumiTop UHR to be shown at the Innovation-Zone.

Company profile of Konica Minolta Sensing Americas

Konica Minolta Sensing Americas, Inc. (KMSA), a wholly owned subsidiary of Konica Minolta, Inc., Sensing Business Unit is recognized as the international leader of industrial color and light measurement. The company is responsible for product lines that continuously revolutionize how visual perception is measured by the world. Konica Minolta Sensing Americas’ Ramsey, New Jersey corporate headquarters is fully equipped with a state of the art service center, technical support center, and a focused sales force dedicated to both the North American and South American regions. When it comes to color and light measurement, the world looks to Konica Minolta.

USA Contact:
Peter Roos, Marketing Manager
Konica Minolta Sensing Americas
Phone: (201) 236-4300 / Toll Free: (888) 473-2625
Web: https://sensing.konicaminolta.us/us
Email: marketing.sus@konicaminolta.com

Company profile of Instrument Systems GmbH.

Instrument Systems GmbH, founded in Munich in 1986, develops, manufactures and markets all-in-one solutions for light measurement applications. Its core products are array spectrometers and imaging colorimeters. The company’s main fields of activity are LED/SSL and display metrology, spectral radiometry and photometry, where today Instrument Systems is one of the world’s leading manufacturers. The Optronik line of products for the automotive industry and traffic technology is developed and marketed at its Berlin facility. Instrument Systems has been a wholly-owned subsidiary of the Konica Minolta Group since 2012.

International Contact:
Dr. Karin Duhnke, Instrument Systems GmbH
Web: https://www.instrumentsystems.com
Email: duhnke@instrumentsystems.com
Further text material and photos: https://services.instrumentsystems.com/owncloud/index.php/s/kAu6wQufYqQXjXs

Terms and product names may be trademarks or registered trademarks of their respective holders and are hereby acknowledged.

 

Privacy Preference Center